Call UsNew Holland Discbine® 316 (roll)
Discbine® 313/316 Center-Pivot Disc Mower-Conditioners Discbine® 316 (roll)
Overview:
THE ULTIMATE IN MOWING AND CONDITIONING PERFORMANCE
Features
FAST, SMOOTH CUTTING
You can rely on genuine Discbine® disc mower-conditioners for smooth, trouble-free mowing, even in tough conditions.
THE SHOCKPRO™ HUB ADVANTAGE
ShockPRO™ disc hubs protect the cutterbar by absorbing harmful impacts and can be changed quickly so you’re back making hay quickly.
MOWMAX™ II DISC CUTTERBAR 3-YEAR FACTORY WARRANTY
The reliability of the MowMax™ II true modular disc cutterbar is backed by three full years of complete warranty coverage. It includes one full year of base factory warranty, plus two additional years of disc cutter bar coverage. It’s peace of mind direct from the New Holland factory, so cut close with confidence.
WIDEDRY™ CONDITIONING
New Holland’s WideDry™ conditioning systems produce a thinner crop mat for smoother crop flow, more uniform conditioning and faster drydown.
Specifications
| Discbine® 316 (roll) | |
| New Holland-Disc Cutterbar | |
| Type | MowMax™ II True Modular Disc Cutterbar |
| Width of Cut, ft. in. (m) | 16' 3'' (4.95) |
| Number of discs | 10 |
| Number of knives | 20 (2 per disc) |
| Disc Speed, rpm | 2,250 |
| Cutting angle | 2 to 10 degrees |
| Hydraulic Cutting angle control | Standard |
| Standard Cutting height skid shoe, in. (mm) | Standard 0.79-2.07 (20-69 |
| Fixed Raised, high-stubble skid shoe | Optional 79-5.75 (20- 146) |
| Adjustable Raised, high-stubble skid shoe | Optional 3-5.5 (76 - 140) |
| BioMass skid shoe | Optional 5-7.75 (127- 197) |
| Ground clearance with header fully raised, in. (mm) | 16.2" (411) |
| Cutterbar Flotation | Vertical and lateral, adjustable springs |
| QuickMax™ Knife Change System | Optional |
| ShockPro™ Disc Drive Hub protection system | Standard |
| MowMax™ 3-year cutterbar protection plan | Standard |
| Chevron-Design Roll Conditioner | |
| Chevron-Design Roll Conditioner | Optional |
| Type. | Choice of molded rubber or steel rolls |
| Roll Length, in. (mm) | 125 (3175) |
| Roll Diameter, in. (mm) | 10.4 (264) |
| Roll Drive | 4 HB V-belt and enclosed gears |
| Roll Speed, rpm | Two-Speed: 750 or 640 |
| Roll Pressure System | Torsion Bar |
| Conditioner Intensity Adjustment | Single crank adjustable roll pressure and two stop bolts to adjust roll gap |
| LeaningEdge™ Flail Conditioner | |
| LeaningEdge™ Flail Conditioner | Optional |
| Number of LeaningEdge flails | 120 |
| Semi-Swinging LeaningEdge flail design | Standard |
| Rotor Diameter, in. (mm) | 22 (560) |
| Standard Speed, rpm | 1042 |
| Optional Slow Speed, rpm | 752 |
| Drive. | 4 HB V-belt |
| Conditioner Intensity Adjustment. | Single crank adjustable rotor hood |
| Optional Textured Hood Liner Kit | Optional |
| Attachment | |
| Standard Drawbar | - |
| Drawbar Swivel Hitch | Optional |
| 2-pt Swivel Hitch | Optional |
| Dimensions | |
| Height, Transport, ft. in. (m) | 7' 5" (2.26) |
| Height, Operating, ft. in. (m) | 6' 7" (2.01) |
| Width, Transport, ft. in. (m) | 16' 7" (5.05) |
| Width, Operating, Std. Drawbar Hitch, ft. in. (m) | - |
| Width, Operating 2-pt Swivel Hitch, ft. in. (m) | 25' 7" (7.8) |
| Width, Operating Drawbar Swivel Hitch, ft. in. (m) | 19' 7'' (6.0) |
| Length, Transport, Standard Drawbar Hitch, ft. in. (m) | - |
| Length, Transport, 2-pt Swivel Hitch, ft. in. (m) | 32' 0'' (9.7) |
| Length, Transport, Drawbar Swivel Hitch, ft. in. (m) | 31' 0'' (9.4) |
| Length, Operating, Standard Drawbar Hitch, ft. in. (m) | - |
| Length, Operating, 2-pt Swivel Hitch, ft. in. (m) | 26' 7'' (8.1) |
| Length, Operating Drawbar Swivel Hitch, ft. in. (m) | 25' 7'' (7.8) |
| Weight, Operating lbs. (kg) | 6,700 (3039) |
| Drive | |
| Drive | 1000 rpm PTO, enclosed gears and four HB belt |
| Drive Protection | |
| Drive Protection | Slip clutch and over-running clutch |
| Hydraulics | |
| Hydraulic swing | Standard (double-acting cylinder) |
| Operating Position | Center-Pivot, Right or Left Side |
| Hydraulic lift | Standard (operated by two single-acting cylinders; master/slave) |
| Hydraulic tilt | Optional (operated by single-acting cylinder and incorporated into the lift system) |
| Material Discharge | |
| Swath, ft. (mm) | 10 (3000) |
| Windrow, ft. (mm) | Adjustable from 3 to 8 (914 to 2400) |
| Wide Thin Fin Kit (100 % Coverage) | - |
| Speeds | |
| Operating, mph (kph) | 0 to 9 (0 to 14.5) |
| Transport, mph (kph) | 20 (32) |
| Tractor Requirement | |
| Tractor Requirement | 100 PTO hp (75 kW) or greater with standard ASAE Category III drawbar. |
| Hydraulic valves | All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights |
| Tubeless Ag Rib Implement Tires | |
| Size | 12.5L x 15 8PR |