Call UsToro ProCore® 648s (09960)
ProCore® 648s (09960)
ProCore® 648s Series Turf Aerator
Features
Smooth, Quiet, Powerful
To give the ProCore 648s its uncommonly smooth operation, the action of the tine arms are modeled after a six-cylinder car engine. The arms work in pairs to counterbalance the coring action. This precise configuration virtually eliminates hopping, rocking and unnecessary vibration.
Electronically Controlled Drive
This smart technology enhancement utilizes an electronically controlled hydrostatic 3-wheel drive which maintains more consistent hole spacing on sloping terrain. It also essentially eliminates front wheel scrub in turns while providing a tighter turning radius. Operators can easily increase speed during turns, improving efficiency.
Delayed Mode
When operating in Delayed Mode, the onboard controller continuously monitors key operational parameters, reducing grass tufting when coring head drops to start a pass. It also allows operators to easily target where they want the coring head to drop or raise, making starting and ending passes or jumping up and over an in-ground obstacle, like an irrigation head, much easier.
Toro Titan Tines
View the Toro Titan Tines Guide & Catalog
Onboard Storage
Bring a hot beverage, field notes, a sweatshirt, or carry some extra tines, the onboard storage has plenty of room.
Compatibility
All ProCore 648 accessories will work on ProCore 648s.
Deep, High Quality Holes
RotaLink™ geometry allows the tines to enter and exit the ground cleanly leaving a high quality result and a quick return to play.
InfoCenter Smart Settings
Set and Save precise hole depth and spacing to ensure consistent, condition-driven aerification that yields outstanding results. This controller allows much wider range of adjustment in 0.25” (5 mm) increments, ensuring just the right amount of aeration to match the needs of the turf.
Ergonomics
Completely redesigned operator handle with intuitive controls that allows simple one hand operation from either side of the machine, allowing operators to walk and keep focus forward with less fatigue. The floating handle also allows any height person to operate the machine comfortably.
TrueCore™ Ground Following
TrueCore™ sensing system automatically maintains tine depth on the fly to match the ground undulations providing consistent coring depth of up to 4" (10.2 cm).
LED Light Kit
To get an early start or extend the work day, illuminate the path with the accessory five LED light kit.
Specifications
| Aeration Type | Shallow |
| Brakes | Hydrostatic |
| Construction | Welded steel frame with cast crank and arm assembly. |
| Controls | Redundant operator presence bails, aeration start/stop bails and traction speed thumb wheels on handle. Tine length calibration, tine depth and forward hole spacing set and saved in InfoCenter. Bump stop, delayed or immediate drop switch, cruise control o, Redundant operator presence bails, aeration start/stop bails and traction speed thumb wheels on handle. Tine length calibration, tine depth and forward hole spacing set and saved in InfoCenter. Bump stop, delayed or immediate drop switch, cruise control on/set/off switch, aerate or transport switch and optional LED light kit switch located on operator console. Ignition, tachometer on side console. Throttle and choke on engine. |
| Electrical System | 12-volt, 15 amp regulated charging alternator/generator. BCI Group No.: U1 battery, 300 cold cranking amps @ 0°F. Micro-processor logic control. |
| Engine | Kohler®, 2-cylinder, air-cooled, 23 hp (17.1 kW) gross, 19 hp (14.2 kW) net @ 3000 rpm, 41 cu-in. (674 cc) displacement. Dry, large capacity, replaceable element air filter. External spin-on oil filter, 2-quart (1.9-liter). |
| Fuel Capacity | 7.5 gallons (28.4 liter), gasoline. |
| Gauges/Instrumentation | InfoCenter™, tachometer. |
| Ground Clearance | 4.75" (12.1 cm) |
| Height | Head Raised: 45" (114.3 cm) Head Lowered: 36.5" (92.7 cm) Handle Raised: 60.7” (153.0 cm) Handle Lowered: 47.5” (119.7 cm |
| Hydraulic System | Remote spin-on filter. 3.0- gallon (13.2 liter) capacity, Toro PX Extended Life hydraulic fluid. |
| Interlocks | Operator presence, clutch latch, traction neutral, coring head raise/lower.Clutch latch, traction neutral, coring head raise/lower. |
| Length | Handle Down: 116.3” (293.1 cm) Handle Raised: 91.8” (231.3 cm) |
| Number of Tine Heads | 6 |
| Operating Speed | Transport Speed: Forward: 0-4.5mph (0-7.2km/h) Reverse: 0-2mph (0-3.2km/h) Aerating: Forward: 0-2.5mph (0-4km/h) Reverse: 0-2mph (0-3.2km/h) |
| Operating Width (Working Width) | 50.12" (127.3 cm) |
| Optional Accessories | LED Light Kit, Windrower Kit, Tire Scrapers, Rear Roller Kit, QuickChange® Tool |
| Tires | 20" x 10" - 10", 2-ply, Smooth Tread |
| Track Width | 38.3" (97.3 cm) |
| Traction Drive | Series-Parallel, closed loop, hydrostatic drive. 3WD, except it automatically switches to 2WD while in aeration mode and traveling in forward direction with coring head raised allowing a tighter turning radius. Electronically controlled variable displacem, Series-Parallel, closed loop, hydrostatic drive. 3WD, except it automatically switches to 2WD while in aeration mode and traveling in forward direction with coring head raised allowing a tighter turning radius. Electronically controlled variable displacement piston type pump. High-torque, low-speed wheel motor drive. |
| Weight | 1,642 lbs (744.7 kg) |
| Wheelbase | 44.5" (113 cm) |
| Width | 50.12" (127.3 cm) |