Call UsToro Workman® HDX-D 4WD (07387)
Workman® HDX-D 4WD (07387)
Workman® HDX Series
Features
Payload Capacity
The Workman HDX line of vehicles provides total payload capacity up to 3352 lbs.
Operator Comfort
In addition to excellent ride quality, the HD Series offers an easy to read instrumentation package, enhanced leg room, a radio / beverage holder, easy to reach controls and a deep storage box.
Four Wheel Drive Traction
Automatic, on demand, bi-directional four wheel drive traction system provides additional traction when needed without operator action.
Ride Quality
Independent front suspension consisting of two double A-frames with opposing dual coil springs and dual shock absorbers provides 5.75 in. (14.6 cm) of front suspension travel. Rear suspension design consists of a DeDion rear axle and dual independent leaf springs and shock absorbers to provide 3 in. (7.6 cm) of rear travel. Benefits include operator comfort, safety, reduced operator fatigue, productivity and efficiency gains.
Versatility
The Workman® can perform a variety of work tasks beyond hauling and towing with attachments such as a 200 Gallon (757 Litre) Sprayer, Vicon® Spreader, 1/3 Vertical Platform Lift, Patriot® Aerial Lift and Topdressers. Numerous accessories enhance versatility including Canopy, Folding Windshield, Various Light Kits, Deluxe Hard Cab, Various Flatbeds, 4-Post ROPS, Automatic Tailgate Release, Rear PTO and others.
Tough Frames
The Workman® front space frame design is multi-dimensional or truss like, providing superior strength and torsional rigidity in rough terrain. The rear frame uses a C-channel design to provide superior strength in hauling heavy loads.
High Performance Engine
Liquid cooled diesel engine provides excellent low end torque and is EPA Tier 4 emmission compliant and B20 biodiesel ready.
DeDion Rear Axle
The DeDion rear axle design is an automotive technology which isolates the engine, transmission and main frame from all load forces, eliminating stress to these main components. The I-beam design provides superior ability to handle vertical loading, exactly the reason I-beams are used extensively in the construction industry.
Disc Brakes
4 wheel hydraulic disc brakes provide greater stopping power and easier servicing than traditional drum brakes.
Front Impact Bumper
A specially designed composite bumper with seven (7) energy absorbing crush zone cones protects the Workman to withstand impacts up to 3 mph (4.8 km/h) under full load with no permanent deformation.
Specifications
| Air Filter | Remote mounted, heavy-duty 2-stage air cleaner with evacuator valve |
| Alternator | 60 amps with electronic regulator |
| Battery | 12V |
| Brakes - Front | Hydraulic Disc |
| Brakes - Rear | Hydraulic disc |
| Cargo Bed | Yes |
| Cargo Capacity | 2,785 lbs. (1266 kg) |
| Clutch | 7.5" (19 cm) clutch and pressure plate |
| Cooling System | Liquid Cooled |
| Crated Model | No |
| Differential Lock | Manual engage rear differential lock |
| Displacement | 950cc (58 ci) |
| Drivetrain | Diesel |
| Frame | Steel space frame front frame and C-channel rear frame. |
| Fuel / Power Source | Diesel |
| Fuel Capacity | 6 U.S. gal. (22.7 L) |
| Fuel Filter | Combination fuel filter/water separator with a 30 micron filtration and 50 mesh suction screen in tank. |
| Fuel Pump | Electronic pump |
| Gauges/Instrumentation | Fuel and coolant temperature gauges. Hour meter. Oil pressure, check engine and battery charge indicator lights. Tachometer and speedometer. |
| Ground Clearance | 7" (18 cm) |
| Height | Overall Top of ROPS: 75.8" (192.5 cm) |
| High Speed Lockout | Interlock key switch that prevents engine from running in 3rd gear. Limits engine RPM to 2,200 in 3rd gear high range (HDX gas). |
| Horn | Standard |
| Hydraulics | 4 gpm (15 lpm) gear pump provides hydraulic flow for power steering and lift in series. Lift control valve with quick disconnects for dual lift cylinders or for attachments when quick disconnects are switched. 8 quart total capacity. |
| Inside Turning Radius | 100" (254 cm) |
| Interlock | To start engine, clutch pedal must be depressed and remote hydraulic lever must be in neutral position. If installed, high flow hydraulics and rear PTO must be disengaged/switched off |
| Outside Turning Radius | 300" (762 cm) |
| Overall Width | 64.7" (164.3 cm) |
| Power Rating | 23.3 hp (17.4 kW) |
| Power Steering | Yes |
| Power Train (Engine Description) | Kubota® 902D, 3-cylinder, inline vertical, 4-cycle, liquid cooled, counterbalanced diesel engine. Full pressure lubrication with spin-on oil filter. Meets EPA Tier IV compliance. Biodiesel ready for use up to B-20. |
| Product Length | Overall w/o Bed: 127.6" (324 cm) Overall w/ Full Bed: 130" (330 cm) |
| Rear Draw Bar | Standard |
| Rear Draw Bar Description | Steel hitch bracket bolted to rear DeDion axle. Mounting plate provides mounting hole for pin or ball hitch and incorporates two safety chain mounting holes. Maximum tongue weight of 600 lbs (272 kg). Trailers over 1500 lbs require trailer brakes. |
| Steering System Description | Hydraulic power steering with steering valve coupled to hydraulic cylinder with thru shaft. Maximum steering angle is 70 degrees on 2WD and 50 degrees on 4WD. |
| Suspension - Front | Independent system with dual "A" frame control arms, dual coil springs and dual shock absorbers with anti-sway bar. |
| Suspension - Rear | DeDion rear axle (weight carrying axle) suspension independent of transaxle with dual leaf springs and dual shock absorbers. |
| Suspension Travel - Front | 5.75" (14.6 cm) |
| Suspension Travel - Rear | 3" (7.6 cm) |
| Tires - Front | 20" x 9" - 12", 6-ply, Turf Tread |
| Tires - Rear | 24" x 12" - 12", 6-ply, Turf Tire |
| Total Vehicle Capacity | 3,185 lbs. (1448 kg) |
| Towing Capacity | 3,500 lbs. (1587 kg) |
| Traction Drive | Fully automatic on-demand, bi-directional system. Uses dual bi-directional clutches. In event of rear tire slippage, clutches transmit power proportionally to front wheel with highest traction. |
| Traction Drive (System) | 4WD |
| Transmission | Rear transaxle directly connected to engine, twin axle drive. 3-speed synchromesh (forward speeds only), h-shift pattern with high-low range providing 6 forward speeds and 2 in reverse. Transmission housing doubles as hydraulic reservoir with outlet scree, Rear transaxle directly connected to engine, twin axle drive. 3-speed synchromesh (forward speeds only), h-shift pattern with high-low range providing 6 forward speeds and 2 in reverse. Transmission housing doubles as hydraulic reservoir with outlet screen and external filter. |
| Vehicle Configuration | Standard |
| Vehicle Type | Heavy Duty |
| Weight | w/o Fuel: 2,015 lbs. (916 kg) |